風管制作作業都有哪幾個要求？

發布人：http://www.2229244.com   發布時間：2024-06-18 19:07:36

　　1、風管預制應有獨立的工作場地，場地應平整、清潔，加工平臺應找平。雙面鋁箔絕熱板風管等其它復合材料風管的場地應干燥，應有足夠的成品堆放場地；

　　1. The prefabrication of air ducts should have an independent work site, which should be flat and clean, and the processing platform should be leveled. The site for double-sided aluminum foil insulation board air ducts and other composite material air ducts should be dry and have sufficient storage space for finished products;

　　2、作業地點應有安放施工機具和材料堆放場地，設施和電源應有可靠的防護裝置。作業場地道路應暢通。必須有能滿足消防要求的各種器械及設施；

　　2. The work site should be equipped with construction equipment and material storage areas, and facilities and power sources should have reliable safety protection devices. The roads at the work site should be unobstructed. There must be various instruments and facilities that can meet the fire protection requirements;

　　3、加工設備布置在建筑物內時，應考慮建筑物樓板、梁的承載能力，必要時應采取相應措施；

　　3. When arranging processing equipment inside buildings, the bearing capacity of building floors and beams should be considered, and corresponding measures should be taken if necessary;

　　4、大樣圖、系統圖經審查符合要求，并進行了技術及交底；

　　4. The detailed drawings and system diagrams have been reviewed and meet the requirements, and technical and safety briefings have been conducted;

　　5、對于潔凈系統的風管制作應有干凈封閉庫房儲存成品或半成品；

　　5. For the production of air ducts in clean systems, there should be a clean and enclosed warehouse for storing finished or semi-finished products;

　　6、加工場地應預留現場材料、成品以及半成品的運輸通道，加工場地的選擇不得阻礙消防通道。

　　6. The processing site should reserve transportation channels for on-site materials, finished products, and semi-finished products, and the selection of the processing site should not obstruct fire exits.

　　以上是關于 濟南風管加工廠 的介紹，若想了解相關知識可請點擊：http://www.2229244.com我們將會全心全意為您提供滿分服務，歡迎您的來電！

　　The above is an introduction to Jinan Wind Pipe Processing Factory. If you want to learn more about related knowledge, please click: http://www.2229244.com We will wholeheartedly provide you with full score service. Welcome to call us!